avery

What Avery

Every Avery audit ends with two numbers. Your current score, and a projected score. Something like 64 today, 77 if you do the work.

That second number gets read three different ways by three different people. Some treat it as a promise. Some treat it as marketing. Some ignore it entirely and go straight to the findings, which is closer to correct than the first two.

Scoring tools almost never explain how their numbers are produced, which is a reasonable business decision and a bad decision for the person being scored. If you do not know what a number is made of, you cannot tell when it is telling you something and when it is not. So here is the full explanation of the projected score: how it is calculated, what it deliberately leaves out, and what it does not claim to predict.

The short definition

The projected score is your current score plus the estimated point gain from completing the three highest-priority fixes in your audit. Nothing else.

That is the whole definition, and the important word in it is three.

A typical audit surfaces nine to twelve findings. Only three of them carry a priority rank, and only those three feed the projected score. The other six to nine findings are real, they are worth doing, and they contribute nothing to the number at the bottom of your report.

This is intentional and it is worth understanding, because it means the projected score is not an estimate of your profile's ceiling. It is an estimate of one specific, bounded piece of work.

Why only three

Because a projection you will not act on is worse than no projection.

If the projected score included all twelve findings, the number would be considerably larger and considerably less useful. It would describe a version of you who spent an entire weekend rewriting a profile, which is a version of you that mostly does not exist. Almost nobody completes twelve fixes. A large share of people complete two or three, usually the ones they were told to do first.

So the projection is scoped to what actually gets done. Three fixes, each with a time estimate attached, each with the point movement stated on the finding itself. If you do those three and your score does not move roughly the projected amount, the audit was wrong, and that is a claim worth being able to check. A number that covers twelve hypothetical fixes cannot be checked by anyone.

The logic behind which three get chosen is a separate topic and it is covered in how Avery decides which LinkedIn profile fix you do first.

Why the number is usually small

Projected gains generally land in the range of eight to fifteen points. Not forty. There are three structural reasons, and each one tells you something about how the underlying scoring works.

1. The weights cap what any single fix can do

The overall score is a weighted blend of four pillar scores: First Impression, Story, Proof, and Visibility. The weights change depending on what you told Avery you are trying to do. In job search mode, First Impression carries 35 percent, Story 30, Proof 25, and Visibility 10.

That weighting is the ceiling on any individual fix. Suppose your Visibility pillar is genuinely bad, a 3 out of 10, and you fix it completely. In job search mode, moving Visibility from 3 to 9 moves your overall score by six points, because Visibility is only a tenth of the total. Six points is a real gain and it is not a transformation, and any tool telling you that posting more will transform your profile is not doing weighted math. That specific case is unpacked in why visibility is only 10 percent of your LinkedIn score.

2. High scores have less room

A profile at 82 has a smaller projected gain than a profile at 51, and not because the advice is worse. There is simply less distance available, and the remaining problems are harder ones. The fixes that produce large movement are usually structural and obvious: no headline strategy, an About section that is a job description, an experience section with no evidence in it. Once those are gone, what is left is refinement, and refinement moves scores in ones and twos.

This is worth saying plainly because a small projected gain on a strong profile is not a sign that the audit found nothing. It is a sign the audit found nothing large, which is different and is good news.

3. The projection refuses to promise what it cannot deliver

A profile scoring 28 is not going to 90 from three fixes, and an audit that said so would be lying in a way that is easy to detect two weeks later. A 28 usually means several pillars are weak at once, and three actions cannot repair four pillars. In those cases the projection stays modest and the audit says directly that this is the first stage of a longer rebuild.

The constraint here is deliberate: the projected score is capped by what is realistically achievable from the stated actions, not by what would look encouraging on a report.

A worked example

Here is the arithmetic on a composite profile, so the number stops being a black box. A mid-level marketer in job search mode. Pillar scores out of 10: First Impression 5.5, Story 6.0, Proof 7.0, Visibility 4.0.

Weighted, that is (5.5 x 0.35) + (6.0 x 0.30) + (7.0 x 0.25) + (4.0 x 0.10), which comes to 5.9 out of 10, or 59 out of 100.

Now the three priority fixes. Rewrite the headline so it names the role and the specialty instead of the current job title, which is a First Impression fix worth roughly a point and a half on that pillar. Replace the opening two lines of the About section, which is a Story fix worth about a point. Add evidence to the two most recent experience entries, a Proof fix worth about a point.

Run the same weighting again with First Impression at 7.0, Story at 7.0, and Proof at 8.0. That is 6.9 out of 10, or 69. Projected score: 69, a ten point gain.

Notice what this shows. The Visibility 4.0 stayed exactly where it was, because it was not one of the three, and because at 10 percent weight it would have been the least efficient place to spend effort anyway. Notice also that the biggest single mover was the headline, which takes about fifteen minutes. That combination, small effort against a heavily weighted pillar, is what the priority ranking is looking for. The reasoning behind the First Impression weight specifically is in why first impression is 35 percent of your LinkedIn score.

What the projected score does not measure

This section matters more than the calculation, because misreading the number is more common than misunderstanding it.

It does not predict interviews. It is a profile quality measure, not a hiring outcome measure. Nothing in the score knows about your market, your timing, your compensation expectations, whether the roles you want exist right now, or how many other people are applying. A profile can go from 60 to 78 during a month in which nothing at all happens in your search, and that would not mean the score was wrong. It would mean profile quality is one input among several.

It does not predict profile views. Views are driven by activity and network effects far more than by profile quality. A strong static profile can sit at low view counts indefinitely. The score measures what happens when someone arrives, not how many people arrive.

It is not comparative. Your 71 is not a ranking against other people in your field. It is an evaluation of your profile against a fixed rubric, given the goal you selected. There is no curve and no percentile.

It is not portable across goals. The same profile scored for job search and scored for thought leadership produces two different numbers, because the pillar weights change with the mode. This is the single most common source of confusion and it is explained fully in why the same LinkedIn profile scores differently by goal.

What it is genuinely useful for

Three things, and they are the reason the number exists at all.

Sequencing. Each of the three priority findings carries its own point value. That makes the fixes comparable to each other in a way that a list of recommendations never is. When one fix is worth six points and takes twenty minutes and another is worth two points and takes three hours, the order to work in stops being a matter of opinion.

Expectation setting. If the projection is nine points, you now know that these three fixes are an improvement and not a rescue. That is useful information. It tells you whether to do the three and stop, or to plan for a longer rebuild.

Verification. This is the one people use least and should use most. Do the three fixes, wait, and run the audit again. If the score lands near the projection, the model described your profile accurately. If it does not, either the fixes were implemented differently than described, or the audit was wrong about your profile. Both of those are worth knowing, and neither is knowable without a stated projection to check against.

The honest limitation

The projected score is an estimate produced by a scoring model, not a measurement of a future state. It is bounded by the rubric it uses, which means it can only see what the rubric looks at. Something in your profile could matter enormously to a specific hiring manager in a specific context and carry no weight in the score at all. That is a real gap and no rubric closes it.

What the score does well is remove the guesswork about what to change and in what order. What it cannot do is tell you what the market will do afterward. Any career tool that claims the second thing is selling certainty it does not have.

Read the number for what it is. Two states of the same profile, the distance between them, and an explicit statement of what closes that distance. Then go close it.

If you want to see your own two numbers and the three fixes between them, run an Avery audit at heyavery.ai/pricing.

Ready to put this into action?

Get a personalized LinkedIn audit from Avery — built on 12,000+ real coaching sessions.

Get My Audit